Basic Troubleshooting

32E & 32E-XL Plumb Adjustment
1. Position the arm in the horizontal position during leveling. 2. Using a spirit (bubble) level, check the plumb of the monitor with the level. 3. If adj...
Thu, 14 Feb, 2019 at 1:29 PM
32S Gas Spring Replacement
Include carrier weight, accessories, monitors, or equipment mounted on shelves. 1. Support the carrier end with a Genie lift. 2. Remove the three bolts (F...
Thu, 14 Feb, 2019 at 1:32 PM
32S Course Tension Adjustment
Adjustment can be made by moving the adjustment block up or down in the upper (L) or lower (H) hole positions on the bearing swivel arms (Figure 18).  S...
Thu, 14 Feb, 2019 at 1:35 PM
Basic Boom Troubleshooting
Thu, 14 Feb, 2019 at 1:40 PM