We use the same power switch part number W0011 on all of our warmers. For the W2 models, it is challenging but not impossible to just replace the switch on the header as the overlay covers the mounting holes for the switch. You need a heat gun to reenergize the glue and slowly remove the overlay to get to the screws that hold the switch to replace.
You need to be very careful as we don't sell the Skytron Overlay separately so if that gets damaged the whole header will need to be replaced.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article